1. Welcome to the North American Tamiya Mini 4WD Forum ! Get in and get involved, post today!
    Dismiss Notice

Neo-Zenquish VZ chassis Tuned Class

Discussion in 'VZ' started by ltr74, Mar 23, 2020.

  1. ltr74

    ltr74 FRP Popsicle

    Joined:
    Oct 17, 2017
    Messages:
    284
    Likes Received:
    168
    Location:
    Torrance, CA
    Built this tuned class car inspired by the Zenquish series of cars. It's built using a very similar setup to AR tuned class cars that works very well. Because it's rear motor, I chose to use slightly heavier parts on the front to help keep the front end down. Double stack of new VZ roller stay plate and AR chassis front wide stay FRP under guard, solid 19mm blue rollers , regular locknuts. The rear features the standard H-bar, carbon popsicle brake and fully cowled roller stay all in carbon fiber. Everything held together with countersunk screws and aluminum locknuts. Torque tuned motor with 3.5:1 gears, 620 bearings, hollow axles and unlabeled super hard tires.

    The paint is TS-34 Camel Yellow for the body and TS-35 Park Green for the wheels. The stickers are reproduction Zenquish stickers from a guy in Bali.

    IMG_6625.jpeg
    IMG_6626.jpeg

    IMG_6631.jpeg
    IMG_6627.jpeg
     
    Feroce, Eisenhardt and tarutaru like this.

Share This Page

Top